Just at the moment it is a bit of a struggle fitting everything in to the day. All things I enjoy, but I am being pulled in so many different directions….having to ration cups of tea with friends at the moment as I just don’t have time. If that means you, I am really sorry!
Anyway, I am trying to organise my days so I can fit in a wee bit of sewing first thing, followed by paperwork and by lunch time make sure I am stripping wallpaper in the front bedroom.
There are some achievements from my efforts, for example my very organised fabric stash (I won’t show you my haberdashery and art supplies drawers, as a lady should not post photos of her drawers!)
I have cleared out a load of craft books and magazines I am hoping the WI ladies will take away with them at the next Crafty Night In and made some shelf space. However, there is one spot I am going to have to leave empty for Max the cat!
In addition, yesterday I had one of those wonderful days when you get to realise a project you had only ever seen in your mind. I popped in to the Plush Addict website to get some more linen look cotton (great for book bags) and stumbled across some fabric with a newspaper print. It called to me…“Sue, Sue, buy me and turn me in to a paper boat made from fabric..!”. Yesterday I did just that.
I made a paper version first to get the right size rectangle to start with and used it as a pattern (plus seam allowance) to cut two pieces of the fabric and one of interfacing. Ironed the interfacing to one of the fabric pieces then sewed the two fabric pieces right sides together, turned it inside out, ironed it and top stitched around the outside. Then I just made up the paper boat, ironing at every stage and hand sewing a few stages to help it keep it’s shape. I know I should be modest, but I confess I am a wee bit chuffed at how it turned out!
In addition, last week I had a short telephone interview about crafting and well-being; the way having something to create and to focus on helps deal with anxiety and depression. It is all the more pertinent with the sad news of Robin Williams’ suicide. I am very fortunate and haven’t had much trouble at all with anxiety or depression over the last couple of years, but I am aware of how it lurks in the shadows looking for an opportunity to creep back. One of the reasons I wanted to do the interview is that I believe we should talk about how we feel. Anxiety and depression are not signs of failure, just of being human, and talking about it helps us know we are not alone and that there is always the choice to keep on living…the darkness will pass. It is so sad that the world has lost someone who brought so much to people’s lives through his work.
I am pretty chuffed to have been asked to put together some tutorials for making gifts for your pets. It is part of the ‘I heart my pet’ campaign being run by the nice folk at NOAH – no, not Russell Crowe’s new film (although I do want to see that!) – this is the National Office of Animal Health, which provides expert advice on caring for pets: http://www.pethealthinfo.org.uk/
I want my tutorials to be:
quick to make
and of course, safe!
So I thought a bit of upcycling would be a good idea and I am providing instructions to make:
a pet bed from an old jumper
a catnip fish from a baby sock
a dog coat from an old jumper
Before I start there are some basics about sewing for pets – apologies if I am teaching my grandmother to suck eggs (not that I recall my grandmother ever sucking eggs!). In many ways making crafts for pets is a lot like making toys for children – items need to be washable, they can be chewed so avoid fabric paints that might come off and cause health problems and trimmings that could be a choking hazard, avoid highly flammable materials. Equally, it is important to be sure to keep pins and needles away from little paws. I keep a set number of pins and needles in a pincushion so I can always tell if one is missing and may be stuck in the carpet, and I keep a magnet handy to help find any stray pins and to double check nothing has been left in a craft project.
Of course the really good thing about making things for your pets, is that they are never going to turn round and refuse to use something because ‘it makes my bum look big!’ or ‘nobody else has homemade stuff!’ or ‘I want designer labels!’.
1) how to make a pet bed from an old jumper
1 old jumper or sweatshirt
toy stuffing or the stuffing from an unwanted cushion
ideally a sewing machine (it can be hand sewn, but will take longer to make)
hand sewing needle
Step one – make sure your toy stuffing is packed in a cardboard box (other retailers are available), remove toy stuffing…oh well that’s it really!
What? You want more? Oh well ok…
1) Choose an old jumper or sweatshirt. Any shape or style will do but if, like me, you have used it for decorating, make sure you have scraped off any lumps of paint etc. It needs to be washable so, if it is pure wool, wash it and you can even tumble dry it before you start. It doesn’t matter in the least if it felts when it is washed, but you need to be sure it is not going to shrink to a size too small to be useful.
If your pet is like our cats, they really like to sleep on things that smell of you, so you could wear the jumper for a couple of hours before you cut it up and sew it, and your scent may encourage the pet to sleep in the bed, as it will not smell strange.
2) Although our two cats are quite big, they like sleeping in small spaces, so I only used the sleeves of the jumper to make the sides of my cat bed. If you want to make a bed for a small dog or larger cat, you can cut a piece of fabric, just bigger than the neck hole and either machine or hand sew it in place so you can use the whole of the top section of the jumper. It will make the back of the bed higher than the front, but I think that looks rather good.
3) Turn the jumper inside out and pin the front and back together to hold in place. Use a ruler or straight edge and draw a line from armpit to armpit (I used tailor’s chalk, but as it is on the inside of the jumper it doesn’t matter if you use a felt tip pen). Cut along the line.
4) Stitch along the raw edge – I used an overlocking stitch, but any stitch will do. If you are hand sewing, use a backstitch* to make it stronger.
My jumper is rather old and misshapen but that’s not a problem, just catch in any extra folds.
5) For a smaller bed, cut at the arm hole or either side of the neck hole and join the two pieces together (not necessary if you are using the whole top section). Turn the arms inside out and place one inside the other, right sides together and pin in place.
6) Sew the raw edges. Many sewing machines allow you to remove part of the sewing table, leaving a narrower section to make sewing around a sleeve like this easier.
7) Stuff the long tube made from the sleeves. It is important that you use a stuffing that is washable and has reduced flammability. You can buy toy stuffing that conforms to British safety standards online and in craft shops or you can take the stuffing out of an unwanted cushion; just make sure the cushion has a fire safety label (some older cushions do not and should not be used). I used a couple of unwanted cushions.
8) Use the stuffed arms as a guide for the size of the base. I used a round tray to draw around to cut the base of of the bed from the body of the jumper. I like to make the base circular as it is forgiving – no need to match the centre of the sides to a particular point on the base or to make sure each arm is exactly the same length, but you can make the base any shape you like.
9) Pin the back and front of the jumper to hold in place and cut along the line you have drawn. When you sew the two pieces together you will need to leave a gap to stuff the base of the bed. I have a bad habit of getting carried away and sewing the gap closed, so I use pins with a different colour head (or two pins together) either side of the gap so I know to…’mind the gap’.
10) Turn the base the right side out and stuff it – I often use a chopstick to push the stuffing right up to the seam.
11) Fold over the raw edges, pin in place and hand sew (slip stitch**) closed.
12) Hand sew a running stitch around the open ends of the sleeve tube with a doubled piece of thread, pull tight and over-sew to hold in place.
13) Hand sew (slip stitch) the sleeve tube to the base, gently pulling the tube over the seam in the base as you sew it in – just to be tidy.
I left a small gap at the front of the bed, but you can join up the two sleeve ends if you prefer. I have made the bed quite puffy, as it will flatten once it has a cat in it.
I really like making pet beds from old jumpers – with the sleeves as the side of the bed, it is just like making a hug for a cat.
* with backstitch you overlap your stitches so there are no gaps between them
** slipstitch is an almost invisible way of joining two pieces of fabric
2) how to make a catnip fish from a baby sock
Now we don’t have children, so I don’t have baby socks lying around the place, but I suspect lots of people do (and the socks I use were only a few pence in a charity shop). So save those teeny weeny odd socks from the recycling bin and reincarnate them…in to fish!
1 baby sock
1 bag catnip (available from most pet shops or online)
scraps of felt
needle and thread
1) Turn the sock inside out and push the toe towards the ankle so the heel is sticking out – the aim is to turn the boomerang shaped sock in to a tube, so you need to take out the heel. The sock I used has a coloured heel which makes it particularly easy to see what you are doing.
2) Sew a straight line across the heel, so when you turn the sock the right way out it is now a tube.
3) Using a double thread, over sew by hand to fasten the end of the thread to the sock and then do a running stitch 6cm to 8cm from the ankle opening. Leave the thread and needle hanging from the sock; do not pull tight yet. It is just easier to do the running stitch before filling the sock with catnip.
4) Pour catnip in to the sock as required. I use my jam funnel to make it easier, but a spoon works perfectly well.
5) Pull the running stitch thread tight and fix by sewing back and forth through the gathers. Once the gathers will not come undone, do another row of running stitch lengthwise along the middle of the sock to the ankle opening. Pull tight and over sew to fasten the thread.
6) Cut two circles of coloured felt and two smaller circles of black felt. Sew the black felt to the coloured felt and sew very securely to the sock. Catnip toys get chewed and bitten and scratched, so be sure the eyes will not come off; you don’t want your cat to swallow them!
The only thing left to do is to let your cat(s) play! Our cats go totally mad for catnip and act a bit crazy, so we only let them play with catnip toys when we are there to keep an eye on them.
3) how to make a dog coat from an old jumper
As we head in to the warmer weather you may be packing away your Winter clothes and weeding out a few old things – perfect for making a dog coat so you are prepared for when the Winter weather comes back (usually around July!).
We do not have a dog, but I walk our friend’s dog, George, when she cannot. So before I start, I should like to thank George and his mum Julie and her daughter Jade for letting me be a nuisance and pop in to measure and fit and photograph George.
1 old, thick sweater*
small piece of sew on velcro
* I used one of Mark’s old gardening jumpers because it was really warm and thick, but you could use anything that is big enough. If you use a lighter weight fabric, add a piece of quilt wadding for extra warmth.
Dogs come in all shapes and sizes, so it is difficult to provide a definitive pattern – it all depends on your dog. There may be some trial and error.
1) Start by measuring your dog; you will need:
length of back, from neck to the top of the tail
total circumference around tummy where the strap will be
the required width of the coat
the length from the neck to where the tummy strap will go
2) As this is not a precise science, I recommend making yourself a paper pattern, so you can put it on your dog to check it is the right size and shape before cutting the fabric. You can use dressmaker’s pattern paper, but I just tape pieces of greaseproof paper together to make a large enough piece (mind you, George really did not like the sound of the rustling paper!). The pattern should look like a saddle and should be symmetrical, so it is best to fold the paper in half and cut out the two sides together so they end up exactly the same shape and size.
Hold the paper pattern over your dog and adjust your pattern if necessary.
3) Pin the pattern to your jumper (right way out) and cut around it. If your fabric is lighter weight use the pattern to also cut a piece of quilt wadding (or fleece or old sweatshirt) to sandwich between the two outer layers of fabric.
4) Pin the bias binding (either shop bought or home-made) around the edge of the layers of coat pieces, right sides together.
4) Carefully sew the bias binding in place (you can hand sew using back stitch of you do not have a sewing machine), sewing along the ditch of the fold in the binding and removing the pins as you go.
5) Trim any excess fabric so the edge of the coat pieces and the edge of the binding match. Fold the binding over the edge of the coat pieces to the other side so the raw edge of the binding is folded under and stitch in place. I use hand sewing for this, but you could machine sew close to the edge of the binding if you prefer.
When complete, you should have a contrasting bound edge to the coat, which is probably narrower on one side than the other – pick whichever side you prefer to be the outside of the coat.
6) You will need a short strap to join the two sides of the coat at the front and to hold the coat in place over the tummy. For each strap cut two rectangles of fleece, each about 5cm wide and as long as you need for your dog (see 1. above) – I use fleece as it doesn’t fray, so you do not need to neaten the edges.
Either leave the ends square or pin the two pieces together and round off the corners.
7) For each of the two straps sew around the edge, joining the pieces together – trim if necessary. Starting with the front strap pin in place on the coat and sew, trying to follow the stitching where you joined the two strap pieces together. For George the front strap needed only to be long enough to connect the two sides of the coat, but a larger dog may need a longer front strap.
8) Repeat for the tummy strap, but only sew one end of the strap to the coat – sew velcro to the other end of the strap, the soft side on the strap and the harder, scratchy side to where you want it to join the coat.
Doesn’t George look handsome!!
I hope you find these DIY pet craft projects fun – and I would love to see what you make! Don’t forget to check out what else is going on in the ‘I heart my pet’ campaign on the website, Facebook and Twitter!